Site Tools


hardware:d-link:dir-506l

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
hardware:d-link:dir-506l [2022/02/17 05:16]
– [Power] root
hardware:d-link:dir-506l [2022/03/02 23:01] (current)
– [Download] root
Line 40: Line 40:
   * 240mA IDLE   * 240mA IDLE
   * 600+mA at download speed 5mbps   * 600+mA at download speed 5mbps
-Over 4 hours with 3 connected clients.+\\ 
 +Uptime: ~4 hours with 3 connected clients.
  
  
Line 56: Line 57:
  
  
 +==== Micro USB ====
 +{{:hardware:d-link:p1010477.jpg?200|}}
  
 ==== Headsink ==== ==== Headsink ====
-{{:hardware:dlink:p1010479.jpg?200|}} +{{:hardware:d-link:p1010479.jpg?200|}} 
-{{:hardware:dlink:img_2735.jpg?200|}}+{{:hardware:d-link:img_2735.jpg?200|}}
 ===== OpenWRT ===== ===== OpenWRT =====
  
Line 74: Line 77:
 ==== Installation ==== ==== Installation ====
 Apply factory image via http web-gui or JBOOT recovery page Apply factory image via http web-gui or JBOOT recovery page
 +
 +
 +==== Download ====
 +[[http://www.netlab.linkpc.net/download/software/openwrt/DIR-506L/|DIR-506L]]\\
 +[[https://github.com/rozhuk-im/openwrt/commits/all_local|github.com]]
 +
 +
 +==== Known issues ====
 +
 +=== Upgrade hang ===
 +Upgrade may hang, at least then WebUI used.\\
 +Workaround: stop unbound and dnsmasq before upload f/w to release memory.
 +
 +
 +=== Net hang on boot ===
 +Happen then internal switch exist and disabled.\\
 +<code>NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out</code>
 +[[https://forum.openwrt.org/t/mtk-soc-eth-watchdog-timeout-after-r11573/50000/377]]\\
 +[[https://github.com/openwrt/openwrt/issues/8660]]\\
 +Workaround: unplug net cable untill device started\\
 +Workaround: remove switch from existing configuration or build f/w without defined switch in 02_network and reset config on/after update
  
  
hardware/d-link/dir-506l.1645074992.txt.gz · Last modified: 2022/02/17 05:16 by root