Differences

This shows you the differences between two versions of the page.

--- hardware:d-link:dir-506l [2022/02/17 05:16]
– [Photos] root
+++ hardware:d-link:dir-506l [2022/03/02 23:01]
– [Download] root
@@ Line 40: / Line 40: @@
   * 240mA IDLE
   * 600+mA at download speed 5mbps
-Over 4 hours with 3 connected clients.
+\\
+Uptime: ~4 hours with 3 connected clients.
@@ Line 53: / Line 54: @@
 ==== Power ====
 To allow work without battery add resistor 15-16kOmh\\
-{{:hardware:dlink:img_2726.jpg?200|}}
+{{:hardware:d-link:img_2726.jpg?200|}}
+==== Micro USB ====
+{{:hardware:d-link:p1010477.jpg?200|}}
 ==== Headsink ====
-{{:hardware:dlink:p1010479.jpg?200|}}
+{{:hardware:d-link:p1010479.jpg?200|}}
-{{:hardware:dlink:img_2735.jpg?200|}}
+{{:hardware:d-link:img_2735.jpg?200|}}
 ===== OpenWRT =====
@@ Line 74: / Line 77: @@
 ==== Installation ====
 Apply factory image via http web-gui or JBOOT recovery page
+==== Download ====
+[[http://www.netlab.linkpc.net/download/software/openwrt/DIR-506L/|DIR-506L]]
+[[https://github.com/rozhuk-im/openwrt/commits/all_local|github.com]]
+==== Known issues ====
+=== Upgrade hang ===
+Upgrade may hang, at least then WebUI used.\\
+Workaround: stop unbound and dnsmasq before upload f/w to release memory.
+=== Net hang on boot ===
+Happen then internal switch exist and disabled.\\
+<code>NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out</code>
+[[https://forum.openwrt.org/t/mtk-soc-eth-watchdog-timeout-after-r11573/50000/377]]\\
+[[https://github.com/openwrt/openwrt/issues/8660]]\\
+Workaround: unplug net cable untill device started\\
+Workaround: remove switch from existing configuration or build f/w without defined switch in 02_network and reset config on/after update

Net Lab

User Tools

Site Tools

Differences

Page Tools