Differences

This shows you the differences between two versions of the page.

--- hardware:d-link:dir-506l [2022/02/17 05:04]
– [Power] root
+++ hardware:d-link:dir-506l [2022/03/02 23:01]
– [Download] root
@@ Line 1: / Line 1: @@
 ====== D-Link DIR-506L ======
+is a portable router with battery.\\
+{{:hardware:d-link:dir-506l_a2.jpg?200|}}
 ===== Hardware =====
   * Ralink RT5350 id:1 rev:3 (360 MHz)
@@ Line 35: / Line 37: @@
 ==== Power usage ====
-With Huawei 3272 + 1 WiFi connection
+With [[hardware:huawei:e3272|Huawei E3272]] + 1 WiFi connection
   * 240mA IDLE
   * 600+mA at download speed 5mbps
-Over 4 hours with 3 connected clients.
+\\
+Uptime: ~4 hours with 3 connected clients.
 ===== Photos =====
-{{:hardware:dlink:img_2725.jpg?200|}}
+{{:hardware:d-link:img_2725.jpg?200|}}
-{{:hardware:dlink:img_2728.jpg?200|}}
+{{:hardware:d-link:img_2728.jpg?200|}}
@@ Line 51: / Line 54: @@
 ==== Power ====
 To allow work without battery add resistor 15-16kOmh\\
-{{:hardware:dlink:img_2726.jpg?200|}}
+{{:hardware:d-link:img_2726.jpg?200|}}
+==== Micro USB ====
+{{:hardware:d-link:p1010477.jpg?200|}}
+==== Headsink ====
+{{:hardware:d-link:p1010479.jpg?200|}}
+{{:hardware:d-link:img_2735.jpg?200|}}
 ===== OpenWRT =====
@@ Line 69: / Line 77: @@
 ==== Installation ====
 Apply factory image via http web-gui or JBOOT recovery page
+==== Download ====
+[[http://www.netlab.linkpc.net/download/software/openwrt/DIR-506L/|DIR-506L]]
+[[https://github.com/rozhuk-im/openwrt/commits/all_local|github.com]]
+==== Known issues ====
+=== Upgrade hang ===
+Upgrade may hang, at least then WebUI used.\\
+Workaround: stop unbound and dnsmasq before upload f/w to release memory.
+=== Net hang on boot ===
+Happen then internal switch exist and disabled.\\
+<code>NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out</code>
+[[https://forum.openwrt.org/t/mtk-soc-eth-watchdog-timeout-after-r11573/50000/377]]\\
+[[https://github.com/openwrt/openwrt/issues/8660]]\\
+Workaround: unplug net cable untill device started\\
+Workaround: remove switch from existing configuration or build f/w without defined switch in 02_network and reset config on/after update

Net Lab

User Tools

Site Tools

Differences

Page Tools